Ultimate in On Line UPS Products Since 1988


Bright UPS General Specifications

(Refer to Product Data Sheets for More Details)

INPUT SPECIFICATIONS
Low Voltage Range Nominal 120V (-25%+15%) and / or
High Voltage Range Nominal 230V (-25%+15%) w/o battery
Frequency 50/60Hz Auto-select ± 3Hz (Programmable)
Generator Input Fully compatible with AC Generators
PFC Input Power Factor Correction-Option (0.99)
OUTPUT  
Waveform Pure Sinewave with <5% THD
Power Rating Refer to Model and Rating Chart Below
Selectable Outputs 100V,115V,120V or 220V, 230V, 240V
Voltage Regulation ±3% or better
Frequency on AC Normally synchronized to utility
Frequency Conversion Freq.(& voltage) conversion - optional
Frequency on Battery ±0.3% for either 60 Hz or 50 Hz
Crest Factor 3 to 1
Transfer Time ZERO, True On-Line Design
Surge Protection 480 Joules (Typical)
Lightning Protection 6500A, ANSI C62.41 / IEEE 587 A & B
PHYSICAL  
Dimensions Refer to Product Data Sheet for each model
Temperature 0 to 40C
Humidity 0% to 95% Non-Condensing
Communications RS232, Relay contacts, EPO, SNMP
RS232 Baud Rates 1200, 2400, 4800 or 9600 Baud (selectable)
Power Connections Four to Six output receptacles
Colors Charcoal Gray or Beige are standard
Agencies UL FCC, CE Mark

Output Power at 115VAC
650VA433W5.6A
800VA533W7.0A
1100VA733W9.7A
1500VA1005W13.0A
Output Power at 230VAC
650VA433W2.8A
800VA533W3.5A
1100VA733W4.8A
1500VA1005W6.5A

PDF Version of this page