RUPS 2000 UPS monitoring and controlling software and its associated special UPS cable continuously monitor the status of the utility AC power and the UPS battery condition.

The RUPS version of power management software checks the contact closure signal status in the UPS to notify the host computer when the AC source has failed and the UPS is using the battery.

If a prolonged power outage occurs, RUPS 2000 software determines when the Low Battery condition has been detected. RUPS will then automatically save files and cause an orderly shutdown of application software and the operating system before the battery capacity has been exhausted.

Systems Supported:
Novell Netware, Windows 3.1/95/98/NT/Me/2000 and Windows XP.

Also supports Linux, Microsoft LAN Manager, IBM Lan Server and Artisoft LANtastic.

Feature Summary:

• Power failure and low battery detected via contact closure signals
• Orderly system shutdown after low battery detected.
• Programmable shutdown timer and warning period
• Shutdown of UPS inverter to save battery capacity after system shutdown
• Broadcast and recording of abnormal power status
• Execute command file
• Email and pager notification
• Local control via UPS communications port
• Remote control through TCP/IP.
• Event log for review of event history
• Multiple language support